226 Troubleshooting
Unable Clear Error
The printer cannot clear an error message because the error status
still remains. Try solving the problem again.
uuuu Toner Low
This message indicates that the toner cartridge for the indicated
color is near the end of its service life. Prepare a new toner
cartridge.
Warming Up
The printer is warming up the machine to be ready to print.
Worn Fuser
This message indicates that the fuser unit has reached the end of
its service life. Prepare a new fuser unit.
Worn Photoconductor
This message indicates that the photoconductor unit has reached
the end of its service life. Printing after this message appears is
not guaranteed. Turn the printer off, then replace the
photoconductor unit with a new one. See “Photoconductor Unit”
on page 165 for instructions. The error clears automatically after
you replace the unit and close the printer covers.
Worn uuuu Dev Unit
The developer unit for the indicated color has reached the end of
its service life. You can print after this message appears, but it is
recommended to replace the developer unit. Contact your dealer
and prepare a new developer unit.
To Next Page
Loading...
