Functions of the Control Panel 253
B
B
B
B
B
B
B
B
B
B
B
B
Lang
Specifies the language displayed on the LCD panel and that
printed on the status sheet.
MP Mode
This setting determines whether the MP tray has the highest or
lowest priority when Auto is selected as the Paper Source setting
in the printer driver. When Normal is selected as the MP Mode,
the MP tray has the highest priority as the paper source. If you
select Last, the MP tray has the lowest priority.
Size Ignore
If you want to ignore a paper size error, select On. When you turn
this item on, the printer keeps printing even if the image size
exceeds the printable area for the specified paper size. This may
cause smudges because of the toner that is not transferred onto
the paper properly. When this item is turned off, the printer stops
printing if a paper size error occurs.
Auto Cont
When you turn this setting on, the printer automatically continues
printing after a certain period of time when one of the following
errors occurs: Paper Set, Print Overrun, or Mem Overflow. When
this option is off, you must press the N Start/Stop button to
resume printing.
LCD Contrast
Adjusts the contrast of the LCD panel. Use the u Up and d Down
buttons to set the contrast between 0 (lowest contrast) and 15
(highest contrast.)
To Next Page
Loading...
