2
❏ Be careful not to touch the fuser, which is marked CAUTION
HIGH TEMPERATURE, or the surrounding areas. If the printer
has been in use, the fuser and the surrounding areas may be
very hot.
❏ Do not insert your hand deep into the fuser unit as some
components are sharp and may cause injury.
❏ Avoid touching the components inside the printer unless
instructed to do so in this guide.
❏ Never force the printer’s components into place. Although the
printer is designed to be sturdy, rough handling can damage
it.
❏ When handling toner cartridges or photoconductor units,
always place them on a clean, smooth surface.
❏ Do not attempt to modify or take toner cartridges apart. They
cannot be refilled.
❏ Do not touch the toner and avoid getting toner in your eyes.
Do not insert your hand deep
into the fuser unit.
CAUTION HIGH TEMPERATUR
To Next Page
Loading...
Need help?
General