Using the Printer Software with Macintosh 149
5
5
5
5
5
5
5
5
5
5
5
5
You can enable the Duplex Unit by closing Chooser after selecting
the AL-C4000 icon. However, the Duplex Unit is enabled
automatically when this unit is installed and the printer is
connected with the computer correctly.
As an
ENERGY STAR
®
partner, EPSON recommends the use of
the double-sided printing function. Refer to
ENERGY STAR
®
Compliance for more information on the
ENERGY STAR
®
program.
1. Click the Layout icon on the Basic Settings dialog box. The
Layout dialog box appears.
2. Select the Duplex check box.
3. Select the Left, Top, or Right button as a Binding position.
4. Click Duplex Settings to open the Duplex Settings dialog box.