330 Troubleshooting
Worn TransferUnit
This message warns you that the transfer unit is near the end of
its service life. You can continue to print until the Replace
TransferUnit error message appears, but early replacement is
recommended to maintain high print quality.
To clear this warning message and continue printing, select Clear
Warning from the control panel’s Reset Menu. For instruction
about accessing the control panel menus, see “How to access the
control panel menus” on page 171.
Write Error ROM A/Write Error ROM P
This message indicates an internal error in the printer. Reset the
printer. If this error persists, consult your dealer.
Wrong Photoconductor
An inappropriate photoconductor unit is installed. Install only
the photoconductor unit listed in “Consumable products” on
page 14.
See “Photoconductor unit” on page 263 for instructions on
replacing the photoconductor unit.
XXXX Toner Cart Out
The indicated toner cartridges are not installed in the printer. (The
letters C, M, Y, or K appear in place of XXXX and indicate the
colors Cyan, Magenta, Yellow, and Black respectively.)
Install the indicated cartridges. See “Toner cartridges” on page
258.
To Next Page
Loading...
Need help?
General