Paper Handling 27
2
2
2
2
2
2
2
2
2
2
2
2
❏ To access the printer driver from your application, select
Print or Page Setup from the File menu. You also need
to click Setup, Options, Properties, or a combination of
these buttons.
❏ To access the printer driver from Windows XP, Me, 98, 95,
2000, or NT 4.0, click Start, point to Settings, and click
Printers. Next, right-click the EPSON AL-C4000
Advanced icon and click Properties (in Windows Me,
98 or 95), Printing Preferences (in Windows XP or 2000)
or Document Defaults (in Windows NT 4.0).
❏ To access the printer driver from Macintosh, select Print
from the File menu on any application or select Chooser
from the Apple menu and click the AL-C4000 icon
beforehand.
2. For Windows, click the Basic Settings tab, then select the
Manual Feed check box. For Macintosh, click the Manual
Feed check box on the Basic Settings dialog box.
3. Select the correct paper size from the Paper Size list.
4. If paper of the selected size is already loaded, go on to the next
step. Otherwise, remove any paper remaining in the tray or
cassette. Load a sheet or a stack of the selected size paper with
the printable side up. Adjust the paper guides to match the
paper size you are loading.
Note:
Load paper into the MP tray with the printable surface facing down,
but load the standard and optional lower cassettes with the printable
surface facing up.
5. Print a document from your application. The LCD panel
shows Manual Feed and the selected page size.
6. Press the N Start/Stop button to print. A sheet of paper is
loaded and printed.
To Next Page
Loading...
