70 Using the Printer Software with Windows
2. From the application, access the printer driver. Open the File
menu and choose Print or Print Setup. Then click Printer,
Setup, Options, or Properties, or click a combination of these
buttons, depending on the application you use.
3. Click the Special tab.
4. Select the Form Overlay check box, and click Overlay
Settings to open the Overlay Settings dialog box.
5. In the Overlay Settings dialog box, choose the form from the
Form drop-down list, then click OK.
6. Click OK to print the data.
Different printer settings overlay data
The overlay data is made with the current printer settings (such
as Resolution: 600 dpi). If you want to make the same overlay with
different printer settings (such as 300 dpi), follow the instructions
below.
1
2
To Next Page
Loading...
Need help?
General