Note:
The addresses that can be registered as group dial destinations are limited to addresses registered as speed
dial destinations or as other group dial destinations.
1. In the main screen (Scan mode), press the u or d key to select UTILITY, and then press the Select
key.
2. Press the u or d key to select DIAL REGISTER, and then press the Select key.
3. Press the u or d key to select GROUP DIAL, and then press the Select key.
4. Use the keypad to type in the number (between 1 and 20) for the group dial destination, and then
press the Select key.
5. Use the keypad to type in the group name, and then press the Select key.
Note:
For details on entering/editing text, refer to the Facsimile User’s Guide.
6. Use the keypad to type in the number (between 1 and 220) for the speed dial destination to be
added to the group, and then press the Select key.
The information registered for the selected speed dial destination appears.
7. Press the Select key again.
8. To register another speed dial destination, press the u or d key to select ADD, press the Select key,
and then repeat the procedure from step 6.
9. To finish registering speed dial destinations, press the u or d key to select FINISH, and then press
the Select key.
Editing/Deleting Group Dial Destinations
Information registered with a group dial destination can be edited or deleted.
1. In the main screen (Scan mode), press the u or d key to select UTILITY, and then press the Select
key.
2. Press the u or d key to select DIAL REGISTER, and then press the Select key.
3. Press the u or d key to select GROUP DIAL, and then press the Select key.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Using the Scanner 112
To Next Page
Loading...
Need help?
General
