❏ Select the paper used for the front page
Layout Tab
The Layout Tab allows you to
❏ Print several pages of a document on the same page (N-up printing)
❏ Specify booklet printing (when the duplex option is installed) (AcuLaser CX16NF only)
❏ Print a single copy for enlargement and print several pages
❏ Rotate the print image 180 degrees
❏ Specify Double-Sided printing (when the duplex option is installed) (AcuLaser CX16NF only)
❏ Specify image shift settings
Overlay Tab
Note:
Be sure to use overlays with print jobs with a media size and orientation that matches the overlay form.
In addition, if settings have been specified for “N-up” or “Booklet” (AcuLaser CX16NF only) in the
printer driver, the overlay form cannot be adjusted to match the specified settings.
The Overlay Tab allows you to
❏ Select the form Overlay to use
❏ Add, edit or delete overlay files
❏ Print the form on all pages or only the first page
Watermark Tab
The Watermark Tab allows you to
❏ Select the watermark to be used
❏ Add, edit or delete watermarks
❏ Print the watermark on the background
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Using the Printer Driver 75
To Next Page
