3. Click OK.
Note:
With autoduplexing, the back side is printed first, and then the front side is printed.
Output Tray
The printed media is fed out facing down into the output tray below the control panel. This tray has a
capacity of approximately 100 sheets (A4/Letter) of 80 g/m paper.
Note:
If the media is stacked too high in the output tray, your machine may experience media misfeeds,
excessive media curl, or static buildup.
The output tray can be pulled out to be extended. Adjust the output tray according to the size of paper
to be printed on.
Media Storage
❏ Keep media on a flat, level surface in its original wrapper until it is time to load it.
Media that has been stored for a long time out of its packaging may dry up too much and cause
misfeeding.
❏ If media has been removed from its wrapper, place it in its original packaging and store in a cool,
dark place on a level surface.
❏ Avoid moisture, excessive humidity, direct sunlight, excessive heat (above 35˚C [95˚F]), and dust.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Media Handling 67
To Next Page
Loading...
Need help?
General
