No. Indication Description
5 Scan color Indicates the scan color that is selected. For details on selecting the scan color, refer
to “Setting the Scan Color” on page 115.
6 SUBJECT Select this menu item to specify the subject. For details on specifying the subject,
refer to “Specifying the Subject” on page 116.
Note:
This menu item does not appear if an FTP address or SMB address was specified as
the destination.
7 CANCEL RESERV. Select this menu item to display the list of jobs queued for transmission and to
delete a job. For details, refer to “Deleting a Queued Transmission Job” on page
116.
Note:
This menu item does not appear if an e-mail address, FTP address or SMB address
was specified as the destination.
8 UTILITY Select this menu item to change the various machine settings. For details, refer to
“UTILITY Menu” on page 32.
Note:
This menu item does not appear if an e-mail address, FTP address or SMB address
was specified as the destination.
9 REPORT/STATUS Select this menu item to view the total number of pages printed by this machine
and the results of fax transmissions/receptions as well as to print the reports. For
details, refer to “REPORT/STATUS Menu” on page 30.
Note:
This menu item does not appear if an e-mail address, FTP address or SMB address
was specified as the destination.
Main Screen (Fax Mode) (AcuLaser CX16NF only)
For details, refer to the Facsimile User’s Guide.
Print Screen
When a print job is received, PRINTER:Printing appears in the status section of the main screen. To
display the print screen (as shown below), press the l key while PRINTER:Printing is displayed.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Control Panel and Configuration Menu 27
To Next Page
Loading...
Need help?
General
