Setting Collated (Sort) Copying (AcuLaser CX16NF only)
With collated (Sort) copying, multiple copies of multi-page documents can be printed in order and
sorted by copy set.
Collated (Sort) Copying From the ADF
1. In the main screen (Copy mode), press the u or d key to select the current Sort setting, and then
press the Select key.
2. Press the u or d key to select SORT, and then press the Select key.
The main screen (Copy mode) appears again.
Collated (Sort) Copying From the Original Glass
1. Position the document on the original glass.
Note:
For details on positioning the document on the original glass, refer to “Placing a document on the
original glass” on page 69.
2. In the main screen (Copy mode), press the u or d key to select the current Sort setting, and then
press the Select key.
3. Press the u or d key to select SORT, and then press the Select key.
4. To print color copies, press the Start-Color key. To print monochrome copies, press the Start-
B&W key.
5. When NEXT PAGE? appears in the message window, place the second document page on the
original glass, and then press the Select key.
6. Repeat step 5 until all document pages have been scanned.
7. After all document pages have been scanned, specify the desired number of copies using the
keypad, and then press the Start-Color key or the Start-B&W key to begin printing.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Using the Copier 88
To Next Page
Loading...
Need help?
General
