Duplex (Double-Sided) Copying From the Original Glass
Duplex (double-sided) copying can also be performed by placing the document on the original glass.
1. Position the document on the original glass.
Note:
For details on positioning the document on the original glass, refer to “Placing a document on the
original glass” on page 69.
2. In the main screen (Copy mode), press the u or d key to select the current duplex setting, and then
press the Select key.
3. Press the u or d key to select LONG EDGE or SHORT EDGE, and then press the Select key.
Note:
For details on LONG EDGE and SHORT EDGE, refer to “Duplex (Double-Sided) Copying From the
ADF” on page 86.
4. To print color copies, press the Start-Color key. To print monochrome copies, press the Start-
B&W key.
Scanning of the document begins.
5. When NEXT PAGE? appears in the message window, place the second document page on the
original glass, and then press the Select key.
After the second page (back side) is scanned, printing begins automatically.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Using the Copier 87
To Next Page
Loading...
Need help?
General
