Epson AcuLaser CX16 - Macintosh TWAIN Driver Settings

Macintosh TWAIN Driver Settings
❏ Load
Load a saved settings file (dat file) for scanning.
❏ Save
Save the current settings as a settings file (dat file).
❏ Default
Return all settings to their defaults.
❏ Help icon
Click to display the Help.
❏ About icon
Click to display the software version information.
❏ Paper source (AcuLaser CX16NF only)
Select whether documents are placed on the original glass or loaded into the ADF.
❏ Original Size
Specify the original size.
❏ Scan Type
Specify the scan type.
❏ Resolution
Specify the resolution.
❏ Scale
Specify the enlargement or reduction ratio for the selected area.
Note:
If the resolution is set at 1200
× 1200dpi or higher, a setting larger than 100% cannot be specified.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Using the Scanner 94