Select this setting when scanning in grayscale.
❏ Black and white picture or text
Select this setting when scanning in black and white.
❏ Custom Settings
Select this setting when scanning with Adjust the quality of the scanned picture settings applied.
Note:
If settings have been specified with Adjust the quality of the scanned picture, Custom Settings is
automatically selected.
❏ Adjust the quality of the scanned picture
Click this message to display the Advanced Properties dialog box. In the Advanced Properties dialog
box, settings can be specified for Brightness, Contrast, Resolution, and Picture type (select from
color, grayscale, or black and white).
Note:
These settings are applied when Custom Settings is selected.
❏ Page size (AcuLaser CX16NF only)
Specify the paper size when Page source is set to Document Feeder.
❏ Preview window
Displays a preview image. Drag the rectangle over the image to select an area.
❏ Preview
Click to begin scanning a preview image.
❏ Scan
Click to begin scanning.
❏ Cancel
Click to close the WIA driver window.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Using the Scanner 93
To Next Page
Loading...
Need help?
General
