❏ If the media misfeed occurs at the bottom feed slot and the media does not stick out enough to be
removed, turn the dial at the right in the direction of the arrow until the media can be pulled
out.
3. Close the duplex cover.
Solving Problems with Media Misfeeds
Note:
Frequent misfeeds in any area indicate that area should be checked, repaired, or cleaned. Repeated
misfeeds may also happen if you’re using unsupported print media or original media.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Troubleshooting 177
To Next Page
Loading...
