Selecting the Data Format
The data format for the scanned image can be selected.
1. In the main screen (Scan mode), press the u or d key to select the current data format setting, and
then press the Select key.
2. Press the u or d key to select TIFF, PDF or JPEG, and then press the Select key.
The main screen (Scan mode) appears again.
Note:
❏ If BW Only was selected for the color setting, JPEG does not appear.
❏ PDF data can be opened in Adobe Acrobat Reader.
❏ TIFF files of images that have been scanned with the COLOR or GRAY setting cannot be opened
with the Windows Picture and FAX Viewer, which is included with Windows XP as a standard
component. These files can be opened with image-processing applications such as PhotoShop,
Microsoft Office Document Imaging or ACDsee.
Selecting the Scan Quality Setting
The resolution, scan mode and density appropriate for the scanned image can be selected.
Selecting the Resolution
1. In the main screen (Scan mode), press the u or d key to select the current scan quality setting, and
then press the Select key.
2. Press the u or d key to select RESOLUTION, and then press the Select key.
3. Press the u or d key to select 150×150dpi or 300×300dpi, and then press the Select key.
The main screen (Scan mode) appears again.
Selecting the Scan Mode
1. In the main screen (Scan mode), press the u or d key to select the current scan quality setting, and
then press the Select key.
2. Press the u or d key to select MODE, and then press the Select key.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Using the Scanner 114
To Next Page
Loading...
Need help?
General
