Basic Copy Operation
1. Position the document to be copied.
Note:
For details on positioning the document, refer to “Placing a document on the original glass” on page
69 and “Loading a document into the ADF (AcuLaser CX16NF only)” on page 71.
2. For AcuLaser CX16NF, press the Copy key.
For AcuLaser CX16, go to the step 3.
3. Specify the desired copy settings.
4. Using the keypad, specify the desired number of copies.
Note:
If the number of copies was incorrectly entered, press the Back key, and then specify the correct
number of copies.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Using the Copier 78
To Next Page
Loading...
