Configuration Menu Overview
To display the settings menu for this machine, select UTILITY in the main screen, and then press the
Select key. From the UTILITY menu, settings for the various machine functions can be changed.
UTILITY Menu
From this menu, various machine settings can be changed.
Note:
❏ To return to the previous screen in the UTILITY menu, press the Back key. (If the Back key is pressed
while settings are being specified, those settings are not saved.)
❏ The ADMIN. MANAGEMENT menu is accessible only by the administrator. To display the settings
for this menu, select ADMIN. MANAGEMENT, use the keypad to type in the 6-digit administrator access
code (default: 000000), and then press the Select key.
MACHINE SETTING Menu
Note:
Manufacturer’s default settings appear in bold.
AUTO PANEL RESET Setting
OFF / 30sec / 1min / 2min / 3min / 4min / 5min
Specify the length of time until all settings that have not been programmed,
such as the number of copies, are cleared and return to their default settings
when no operation is performed.
ENERGY SAVE MODE Setting
5min / 15min / 30min / 60min
Enters Energy Save mode in order to conserve energy when no operation is
performed. Specify the length of time in minutes until the machine enters
Energy Save mode.
LCD CONTRAST Setting (LIGHT)
(DARK)
Specify the brightness of the message window.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Control Panel and Configuration Menu 32
To Next Page
Loading...
Need help?
General
