Epson AcuLaser CX16 User Manual

Note:
Do not touch the wires and flat cable shown in the illustration.
Note:
The machine must complete a calibration cycle after the photoconductor unit has been replaced. If
you open the scanner unit or front cover before the machine is reset, the calibration stops, then starts
over again after the cover is closed.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Replacing Consumables 131

Epson AcuLaser CX16 Specifications

General

Brand	Epson
Model	AcuLaser CX16
Category	All in One Printer
Language	English