Note:
It is not possible to exit P/H CLEAN MODE before the operation is finished (even if the Stop/Reset
key is pressed).
If the machine has incorrectly been switched to P/H CLEAN MODE, perform steps 4 through 7, then
steps 11 through 16 (skipping steps 8 through 10) to exit P/H CLEAN MODE mode.
4. Open the front cover.
Note:
Before opening the front cover, open Tray 1 if it is not already open.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Maintenance 146
To Next Page
Loading...
