182
When the Recovering message is removed from the screen, proceed to the next step.
6. Repeat steps 1 to 5 four times. The internal rollers rotate approximately one-quarter of a turn each
time the cover is closed. Repeat this step until the entire roller is clean.
Note: If paper dust adheres to the inside of the vertical path cover, wipe it off with a soft, lint-free
cloth.
7. Open the input tray, and pull the lever to open the scanner cover.
8. Use a genuine Epson cleaning kit or a soft, lint-free cloth to wipe off any dust or dirt on the glass
scanning surfaces and the rollers inside the scanner cover. If the glass surface is stained with
To Next Page
Loading...
