Epson EF21 - Turning off the Projector; Projection Modes

50
• Do not apply strong pressure or shocks to the AC adapter.
• Do not hold the AC adapter with wet hands.
• Do not install the AC adapter in a narrow space and do not cover it with cloth.
• Do not touch the AC adapter for a long time while it is energized. It may cause a low-temperature
burn.
• Do not spray flammable gas such as insecticide on the AC adapter.
• Do not put the AC adapter in a high-pressure container or a cooking appliance such as a microwave
oven.
• Do not place the AC adapter near the projector's air exhaust vent.
• Do not wind the power cord around the AC adapter.
Parent topic: Turning On the Projector (EF22)
Turning Off the Projector
Turn off the projector after use.
Note: Turn off this product when not in use to prolong the life of the projector. Laser life will vary
depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
1. Press the power button on the projector or remote control.
The laser turns off and the status indicator turns off.
2. To transport or store the projector, make sure the status indicator is off, then unplug the power cord.
Parent topic: Using Basic Projector Features
Projection Modes
Depending on how you positioned the projector, you may need to change the projection mode so your
images project correctly.
• Front (default setting) lets you project from a table in front of the screen.
• Front Ceiling flips the image over top-to-bottom to project upside-down from a ceiling or wall mount.
• Rear flips the image horizontally to project from behind a translucent screen.
• Rear Ceiling flips the image over top-to-bottom and horizontally to project from the ceiling and behind
a translucent screen.