Epson EF21 - Adjusting Projector Features; Using the Projector as a Bluetooth Speaker

66
Adjusting Projector Features
Follow the instructions in these sections to use your projector's feature adjustments.
Using the Projector as a Bluetooth Speaker
Operating Connected Devices Using the HDMI Link Features
Shutting Off the Picture and Sound Temporarily
Updating the Firmware Using Epson Projector Update
Resetting the Projector
Using the Projector as a Bluetooth Speaker
You can use the projector's speakers to output audio from a compatible device connected by Bluetooth.
1. Turn on the projector and display an image.
2. Press the projector settings button on the remote control.
3. Select Bluetooth Speaker Mode and press Enter.
The Bluetooth Speaker Mode screen is displayed and the projected image turns off after 10
seconds.
4. Enable the Bluetooth function on the device you want to connect and select EPSON Projector from
the available device list. See the documentation supplied with the device for more information.
Note:
• You can change the name EPSON Projector. Select another name or use a custom name from
the projector's Device name menu.
• System > About > Device name
• To cancel a Bluetooth connection, disconnect from the connected device.
5. Press and hold the esc button for two seconds to exit Bluetooth Speaker Mode.
Note:
• There is a delay in the audio output from any Bluetooth audio device.
• You cannot connect multiple video/audio devices by Bluetooth at the same time.