88
4. The power cord may be defective. Disconnect the cord and contact Epson for help.
Parent topic: Solving Problems
Solving Projector Shutdown Problems
If the projector's light source turns off unexpectedly, try the following steps until the problem is solved.
1. The projector may have entered sleep mode after the interval of time specified in the Sleep Timer
setting in the projector's Power & Energy menu has passed. Press the power button on the
projector or remote control to wake the projector.
• System > Power & Energy > Power > Sleep Timer
Note: After waking the projector, Sleep Timer is automatically set to Off.
2. The projector may have turned off after the interval of time specified in the Switch Off Timer setting
in the projector's Power & Energy menu has passed. Press the power button on the projector or
remote control to turn the projector back on .
• System > Power & Energy > Power > Switch Off Timer
3. The projector may have entered into Bluetooth Speaker Mode. Hold the esc button on the remote
control for two seconds.
4. When the status indicator is lit orange, the projector has overheated and turned off.
Note: The cooling fans may run in standby status depending on the projector settings. Also, when
the projector wakes from standby status, the fans may cause an unexpected noise. This is not a
malfunction.
Parent topic: Solving Problems
Solving Image or Sound Problems
Check the solutions in these sections if you have any problems with projected images or sound.
Solving Missing Image Problems
Adjusting an Image that is not Rectangular
Adjusting a Fuzzy or Blurry Image
Fixing Partial Image Problems
Adjusting an Image that Contains Noise or Static
Adjusting an Image with Incorrect Brightness or Colors
To Next Page
Loading...
