61
If you always want to use a particular aspect ratio for a certain video input source, you can select it using
the projector's Screen menu.
Note: You can select this setting only when the current input source is HDMI.
Changing the Image Aspect Ratio
Available Image Aspect Ratios
Parent topic: Using Basic Projector Features
Changing the Image Aspect Ratio
You can change the aspect ratio of the displayed image to resize it.
1. Turn on the projector and switch to the image source you want to use.
2. Press the settings button on the remote control.
3. Select > Display & Sound > Screen.
4. Select the aspect ratio setting you want to use for your input signal and press Enter.
5. Press the esc button to exit the menus.
Parent topic: Image Aspect Ratio
Related references
Available Image Aspect Ratios
Available Image Aspect Ratios
You can select the following image aspect ratio settings for the HDMI video source.
Note: Using the aspect ratio function to reduce, enlarge, or split the projected image for commercial
purposes or for public viewing may infringe upon the rights of the copyright holder of that image based
on copyright law.
Aspect ratio setting Description
Full Displays images using the full width of the projection area, but does
not maintain the aspect ratio.
Super Zoom Zooms into images. The right, left, top, and bottom edges are
missing.
To Next Page
Loading...
