Epson EF21 - Changing the Projection Mode Using the Menus; Adjusting the Image Height (EF21)

51
Changing the Projection Mode Using the Menus
Parent topic: Using Basic Projector Features
Changing the Projection Mode Using the Menus
You can change the projection mode to flip the image over top-to-bottom using the projector menus.
1. Turn on the projector and display an image.
2. Press the projector settings button on the projector remote control.
3. Select the menus in the following order:
• Advanced Settings > Projection Mode
4. Select the projection mode you want to use and press Enter.
5. Press the esc button to exit the menus.
Parent topic: Projection Modes
Related references
Projector Feature Settings - Projector Menu
Adjusting the Image Height (EF21)
If you are projecting from a table or other flat surface and the image is too high or low, you can adjust the
image using the projector's adjustable foot.
The larger the angle of tilt, the harder it becomes to focus. Locate the projector so that it only needs to be
tilted at a small angle.
1. Turn on the projector and display an image.