67
• You can also connect the projector to Bluetooth audio devices, such as speakers or headphones, to
output the projector's audio from these devices. Select Remotes & Accessories > Pair accessory to
perform pairing.
• You may not be able to connect depending on the standard and type of device.
• Even when connecting within the specified communication distance, connections can be lost due to
the status of the signal.
• The communication method for Bluetooth uses the same frequency (2.4 GHz) as wireless LAN
(IEEE802.11b/g) or microwave ovens. Therefore, if these devices are used at the same time, radio
wave interference may occur, the audio may be interrupted, or communication may not be possible. If
you do need to use these devices at the same time, make sure there is enough distance between
them and the Bluetooth device.
• Bluetooth audio devices are not supported in some countries and regions.
Parent topic: Adjusting Projector Features
Related references
Bluetooth Specifications
Operating Connected Devices Using the HDMI Link Features
You can use the projector remote control to control certain features of devices connected to the
projector's HDMI port.
Note: The connected device and HDMI cable must meet the HDMI CEC standard. The device must also
be configured; see the documentation that came with the device. All devices or functions may not
operate properly even if they meet the HDMI CEC standard. See the documentation supplied with the
device for more information. Use a cable that supports the HDMI standard.
1. Press the settings button on the remote control to open the dashboard.
2. Select the Google TV settings icon on the dashboard.
3. Select Inputs > Inputs > HDMI control.
4. Set HDMI control to On.
5. Adjust the following HDMI CEC settings as necessary.
• To automatically turn off the connected device when you turn off the projector, set Device Auto
Power Off to On.
To Next Page
Loading...
