Epson EMP-X5 Service Manual

4-7
EMP-822/EMP-83/EMP-X5/EMP-S5
SEIKO EPSON Revision:A
4.1.5 Tools and Equipment
The table below lists the tools and equipment required for servicing the projector. All are
commercially available, and should be made ready beforehand.
* q.s.: Sufficient quantity
Table 4-1.
Name Qty. Application
Phillips screwdriver No. 0 (8cm) 1
Disassembling the focus ring and the zoom
ring
Phillips screwdriver No. 1 (10cm) 1
Disassembling the outer case and inner com-
ponents
Phillips screwdriver No. 2 (10cm) 1
Disassembling the outer case and inner com-
ponents
Flathead screwdriver 1 Disassembling the rear foot
Hexagonal box screwdriver (5 mm) 1 Removing the computer interface
Tweezers 1 Removing the front foot
Heat-resistant tape q.s.* Securing cables
Brush 1 Cleaning away dust
Vacuum cleaner 1 Cleaning away dust
Lens cleaner q.s.* Cleaning the projection lens
Gloves 1
Anti-static wrist band 1
Lubricant q.s.*

Epson EMP-X5 Specifications

General

Resolution	1024 x 768 (XGA)
Contrast Ratio	400:1
Lamp Life	3000 hours (Normal Mode), 4000 hours (Eco Mode)
Display Technology	3LCD
Zoom Ratio	1.2x
Projection Size	30 - 300 inches
Brightness	2200 lumens
Weight	2.7 kg
Inputs	Composite video, S-Video
Noise Level	35 dB (standard), 28 dB (economy)