177
• Select Enable to allow a connection
4. Click OK to save your setting.
Parent topic: Restricting Features Available for Users
Related tasks
Accessing the Web Config Utility
Disabling Network Scanning
You can make the following settings in Web Config to disable network scanning using Epson Scan 2
from your computer.
1. Access Web Config and select the Scan tab.
2. Select Network Scan.
3. Under Epson Scan 2, deselect the Enable scanning check box.
4. Click Next.
5. Click OK to confirm your setting.
Parent topic: Restricting Features Available for Users
Related tasks
Accessing the Web Config Utility
Disabling WSD Scan
If you do not want your computer to configure the scanner as a WSD scanning device, follow the steps
below to disable the WSD settings.
1. Access Web Config and select the Network Security tab.
2. Select Protocol.
3. Under WSD Settings, deselect the Enable WSD check box.
4. Click Next.
5. Click OK to confirm your setting.
Parent topic: Restricting Features Available for Users
Related tasks
Accessing the Web Config Utility
To Next Page
Loading...
