Epson FF-680W - Disabling the Network Setting from the Control; Panel; Restoring the Network Settings from the Control Panel

❏ Setting up using the soware disc (only for the models that come with a soware disc and users with computers
with disc drives.)
Insert the soware disc into the computer, and then follow the on-screen instructions.
Selecting Change the Connection Methods
Follow the on-screen instructions until the following screen is displayed.
Select Set up Scanner connection again (for new network router or changing USB to network, etc.) on the
Install Soware screen, and then click Next. Follow the on-screen instructions.
Disabling the Network Setting from the Control Panel
You can disable the network settings.
1.
Press the
button for more than 3 seconds to disable a Wi-Fi and AP mode connection.
e
light and light turn
o
when these are disabled.
Note:
Press the
button to re-connect Wi-Fi and AP mode.
Restoring the Network Settings from the Control
Panel
You can restore all network settings to their defaults.
1. Turn the scanner o.
User's Guide
Network Settings
100