Scan Settings Tab
You can change the scan settings such as the photo type, resolution, or le saving format.
Photo type
Selects a photo type you want to scan. Applies special settings for instant and panoramic photos when
scanning.
Scan my photos at this resolution
Selects a resolution to scan your photos. Increasing the resolution increases the scanning time and le
size.
File format
Selects a le format to save the scanned image.
Note:
When you select JPEG and set the resolution to 1200 dpi or 600 dpi, the scanned image is saved at 100% JPEG quality
(compression).
If you select 300 dpi, the JPEG quality (compression) is set to 84% automatically to reduce the
le
size when saving the
scanned image.
Scan the back of my photos with Epson single-step technology
When scanning photos, you can also scan the back of the photos.
If text on the back of the photos is detected, the back sides of the photos are scanned. If the back sides
are blank, the back sides of the photos are not scanned.
User's Guide
Scanning Photos
53
To Next Page
Loading...
