Epson FF-680W - The Edge of the Original Is Not Scanned When Automatically Detecting the Size of the Original; Character Is Not Recognized Correctly

❏ Change the resolution, and then scan again.
Click
Settings in Epson ScanSmart, Review Scans or on the Select Action window, and then click the
Scanner Settings tab > Scan Settings button > Main Settings tab on the Epson Scan 2 window > Resolution.
The Edge of the Original is Not Scanned when Automatically
Detecting the Size of the Original
Depending on the original, the edge of the original may not scanned when automatically detecting the size of the
original.
❏ Click
Settings in Epson ScanSmart, Review Scans or on the Select Action window, and then click the
Scanner Settings tab > Scan Settings button.
In Epson Scan 2, select the Main Settings tab, and then select Document Size > Settings. On the Document
Size Settings window, adjust Crop Margins for Size "Auto".
❏ Depending on the original, the area of the original may not be detected correctly when using the Auto Detect
feature. Select the appropriate size of the original from the Document Size list.
Click
Settings in Epson ScanSmart, Review Scans or on the Select Action window, and then click the
Scanner Settings tab > Scan Settings button.
In Epson Scan 2, click the Main Settings tab, and then click Document Size.
Note:
If the size of the original you want to scan is not on the list, select Customize, and then create the size manually.
Click
Settings in Epson ScanSmart, Review Scans or on the Select Action window, and then click the Scanner Settings
tab > Scan Settings button.
In Epson Scan 2, click the Main Settings tab, and then click Customize in Document Size.
Character is not Recognized Correctly
Check the following to increase the recognition rate of OCR (Optical Character Recognition).
❏ Check that the original is placed straight.
❏ Use an original with clear text. Text recognition may decline for the following types of originals.
❏ Originals that have been copied several times
❏ Originals received by fax (at low resolutions)
❏ Originals where the letter spacing or line spacing is too small
❏ Originals with ruled lines or underlining over the text
❏ Originals with hand written text
❏ Originals with creases or wrinkles
❏ Paper type made of thermal paper such as receipts may deteriorate due to age or friction. Scan them as soon as
possible.
❏ When saving to Microso® Oce or Searchable PDF les, check that the correct languages are selected.
Check the Language in each save setting window.
User's Guide
Solving Problems
126