Epson FF-680W User Manual

Note:
To scan laminated cards, set the appropriate setting on Epson ScanSmart to increase the accuracy of auto size detection.
Click
Settings > Scanner Settings tab > Scan Settings button > Main Settings tab on the Epson Scan 2 window >
Document Size > Settings, and then select Scan laminated card.
Also, set Detect Double Feed to O.
If you forget to disable Detect Double Feed and a double feed error occurs, remove the card from the ADF and then
reload it, press the
(Double Feed Detection Skip) button on the scanner as shown below to disable Detect Double
Feed for the next scan, and then scan again. e
(Double Feed Detection Skip) button only disables Detect Double
Feed for one sheet.
Related Information
& “Scanning Documents from Computer (Epson ScanSmart)” on page 83
Using Epson ScanSmart, you can easily scan and save your documents.
Large Size Originals
Specications of Large Size Originals
By using the Carrier Sheet and folding the originals in half, you can scan originals larger than A4 size, such as A3
or B4 sizes.
Size Thickness Paper Type Loading Capacity of the
Carrier Sheet
Up to A3 0.3 mm (0.012 in.) or less
(excluding the thickness of
the Carrier Sheet)
Plain paper
Fine paper
Recycled paper
10 carrier sheets
User's Guide
Scanning Documents or Other Originals
72

Epson FF-680W Specifications

General

Type	Document Scanner
Optical Resolution	600 dpi
ADF Capacity	100 sheets
Duplex Scanning	Yes
Daily Duty Cycle	4, 000 sheets
Connectivity	Wi-Fi
Color Depth	24-bit