Epson FF-680W - Making Wi-Fi Settings

Connecting to a Smart Device
You can use the scanner from a smart device. To use the scanner from a smart device, set up from Epson
DocumentScan.
Note:
If you want to connect a computer and a smart device to the scanner at the same time, we recommend connecting the
computer
rst.
1.
Search for Epson DocumentScan in the App Store or Google Play.
2. Download and install Epson DocumentScan.
3. Start Epson DocumentScan.
4. Follow the on-screen instructions to connect the scanner to your smart device.
Making Wi-Fi Settings from the Control Panel
You can make network settings from the scanner's control panel. Aer connecting the scanner to the network,
connect to the scanner from the device that you want to use (computer, smart phone, tablet, and so on.)
Related Information
& “Making Wi-Fi Settings by Push Button Setup (WPS)” on page 97
& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 98
& “Making AP Mode Settings” on page 98
Making Wi-Fi Settings by Push Button Setup (WPS)
You can automatically set up a Wi-Fi network by pressing a button on the access point. If the following conditions
are met, you can set up by using this method.
❏ e access point is compatible with WPS (Wi-Fi Protected Setup).
❏ e current Wi-Fi connection was established by pressing a button on the access point.
Note:
If you cannot nd the button or you are setting up using the soware, see the documentation provided with the access point.
User's Guide
Network Settings
97