6. Slide the edge guides to t the edge of the originals making sure there are no gaps between the originals and
the edge guides. Otherwise, the originals may be fed skewed.
Note:
❏ When scanning originals with punch holes such as loose leaf paper, load the originals with the holes facing the side or
facing down. ere must not be any holes within a 30 mm (1.2 inches) strip at the center of the originals. However,
there can be holes within 30 mm (1.2 inches) from the leading edge of the originals. Make sure that the edges of the
punch holes do not have burrs or curls.
❏ When scanning thin paper with crinkles that are causing paper jams or double feeds, you may be able to improve the
situation by pressing the
(Slow Mode) button to slow down the feeding speed. Pressing the (Slow Mode)
button once slows down the paper feeding speed; press it again to return to normal speed.
User's Guide
Scanning Documents or Other Originals
63
To Next Page
Loading...
