Placing a Mixture of Originals at Dierent Sizes
1. Open the input tray and extend the input tray extension. Slide out the output tray, extend the output tray
extension, and then raise the stopper.
Note:
If there are any thick originals amongst the originals, to stop the thick originals from bumping into the output tray and
falling out, store the output tray and do not use it to stack the ejected originals.
2. Slide the edge guides on the input tray all the way out.
User's Guide
Scanning Documents or Other Originals
82
To Next Page
Loading...
