4. Select Automatic Feeding Mode on the Main Settings tab.
5. Make other settings for scanning on the Epson Scan 2 window.
Note:
You can make timeout settings to
nish
Automatic Feeding Mode.
Select Settings on the Document Source list to open the Document Source Settings window. Set Automatic Feeding
Mode Timeout (minutes) on the window.
6. Click Save to close the Epson Scan 2 window.
7. Click Close to close the Settings window.
8. Click Scan double-sided or Scan single-sided.
Automatic Feeding Mode starts.
User's Guide
Scanning Documents or Other Originals
89
To Next Page
Loading...
