Single-sheet multi-part forms:
l Load single-sheet multi-part forms only into the front
slot with the optional front sheet guide. See 7-17 for
details.
l Use carbonless multi-part forms only.
Continuous paper:
Width
Copies
Thickness
101 to 254 mm (4 to 10 inches) for standard 101
to 406 mm (4 to 16 inches) for wide
Four sheets (one original plus up to three
copies)
0.065 to 0.32 mm (0.0025 to 0.012 inch) for one
sheet
0.12 to 0.32 mm (0.0047 to 0.012 inch) total
Weight
52.3 to 82
g/m*
(14 to 22 lb) for one sheet 40 to
58.2
g/m2
(12 to 15 lb) per sheet in multi-part
forms
l Use carbonless multi-part forms only.
Note : You can use recycled paper with this printer. If you notice
an increase in ribbon consumption and paper jamming, use a
higher grade of paper.
7-4
Technical Specifications
To Next Page
Loading...
