Switching Between Continuous and Single Sheets
Switching to continuous paper
You can easily switch back to printing on continuous paper.
1.
If a single sheet is still in the printer, hold down the
ALT
button
and press the
EJECT
button to eject it.
2.
Lift up slightly on the paper guide and then lower it until it lies
flat on top of the printer. Slide the left and right edge guides
together so that they meet at the middle.
3.
Set the paper-release lever to either the front or rear push-tractor
position, depending on which tractor position you are using.
Your printer loads the continuous paper automatically.
2-22
Paper Handling
To Next Page
Loading...
