Selecting a Paper Feeding Method
Your printer provides four paper paths so you can print on almost
any type of paper:
l Choose the top paper guide to print on single sheets.
l Install the tractor unit in the appropriate location to load
continuous paper from the front, rear, or bottom.
You can mount the tractor unit in three different positions to suit
your particular needs: use it as a front push tractor, rear push
tractor, or pull tractor.
Once you select a feeding method, you simply set the paper-release
lever, load your paper, and print. You can even print on single
sheets without removing your continuous paper supply. Also see
Chapter 4 for information on using an optional additional tractor
unit.
Setting the paper-release lever
You set the paper-release lever to select the active paper path in
your printer. The printer automatically loads paper from the
position you choose.
2-2
To Next Page
Loading...
