Selecting a Paper Feeding Method
Single-sheet position
For all single sheets, whether loaded from the top or
either of the optional cut-sheet feeders; also for loading
single sheets from the front with the optional front sheet
guide.
.
:
45
Front push-tractor position
For continuous paper with the tractor unit installed in
the front.
.
:
c3
Rear push-tractor position
For continuous paper with the tractor unit installed in
the rear.
.
:
43
Pull-tractor position
For continuous paper with the tractor unit installed on
PULL
the top. In this case, you can load paper from the front,
rear, or bottom.
Paper Handling 2-3
To Next Page
Loading...
