Cut-Sheet Feeders
Switching between continuous paper and the cut-sheet
feeder
This printer allows you to switch easily between the cut-sheet feeder
and the tractor-feeding system without removing either the feeder
or the continuous-paper supply.
Switching to continuous paper
1.
Make sure continuous paper is mounted on the tractor properly.
2.
If a single sheet is in the paper path, hold down the
ALT
button
and press the
EJECT
button to eject it.
3.
Place the paper-release lever in the front or rear push-tractor
position.
Note: When you want to print several pages of continuous paper,
fold the first printed page forward at the perforation after the
perforation emerges from below the printer cover. This helps the
printer feed the printed pages properly and prevents paper jams.
Using the Printer Options
4-11
To Next Page
Loading...
