Epson FX-870

Character Tables in the ESC/P Mode
International character sets
The table below shows the international character sets you can select
with the default-setting mode and the ESC R software command.
For example, when you select “Italic-France”in the default-setting
mode, the characters in the//France” row on the table below are used
in the italic character table.
The following eight international character sets can be selected with
the default-setting mode and with the ESC R command.
Country
ASCII code hex
23 24
40 58 5C 5D 5E 60
78 7C 7D 7E
0 U.S.A.
1 France
2 Germany
3 U.K.
4 Denmark
5 Sweden
6 Italy
7 Spain
The following five additional sets are available only with the ESC R
software command.
Country
ASCII code hex
23 24
40 58 5C 5D 5E 60
78 7C 7D 7E
A-8 Appendix