Using Continuous Paper
9.
Open the sprocket covers and fit the first four holes of the paper
over the sprocket pins.
10. Close the sprocket covers.
11. Adjust the right sprocket unit to remove any slack in the paper.
Lock it in place by pushing the sprocket lock backward.
12. Turn on the printer.
13. Make any adjustments to the loading position with the micro-
feed feature, as described in Chapter 3.
14. Install the printer cover.
0
t
CAUTION: Always turn off the printer before you use the
l
knob on its left side to clear paper jams. If the printer is on,
you may damage it or lose the top-of-form position.
2-18
Paper Handling
To Next Page
Loading...
