122
Installing the TCP/IP Protocol
Installing the TCP/IP Protocol on
Windows Me and Windows 2000
When running Windows Me or Windows 2000, your TCP/IP protocol should
automatically be set correctly for the station it is installed on if you are not running a
DHCP server. To check the protocol, follow these steps.
1. Open the Control Panel and double-click the
Network & Dial Up Connections
icon. Then, double-click the
Local Area Connection
icon to display the screen
to the right.
2. Click the
Properties
button to display the
Local Area Properties screen.
3. Double-click
Internet Protocol (TCP/IP)
to display the Internet Protocol Properties
screen.
To Next Page
Loading...
