Epson GT-30000 - Windows 2000

Installing the Software
35
Selecting the GT-30000 as Your Default Scanner
(Windows 2000)
If you have more than one scanner connected to your computer, you can set up the
GT-30000 as the default scanner.
1. Open the Windows Control Panel and
double-click the
Scanners and
Cameras
icon to open the Scanners
and Cameras Properties window.
2. Make sure
EPSON GT-30000
is
selected, and click the
Properties
button. You see the EPSON GT-30000
Properties window.
3. Click the
Utility
tab. Make sure
Select
as default scanner for EPSON
TWAIN HS
is checked, and then
click
OK
.
4. Click
OK
to close the Properties
window.