Epson GT-30000 User Manual

22
Setting Up Your Scanner
2. Turn the card over so that the circuit
board side is facing down, and insert it
in the optional interface slot. Push
gently until the card is firmly seated in
the expansion slot inside the optional
interface slot.
3. Tighten the retaining screws and
reconnect the scanner’s cables.
Connecting the IEEE 1394 Cable to Your Computer
The IEEE 1394 scanner interface card has two cable connectors. You can use either
one to connect the scanner directly to your computer. At the same time, you can use
the second connector to connect other IEEE 1394 devices in a daisy chain or tree
configuration. You can also connect the scanner to another IEEE 1394 device so that
it’s the last IEEE 1394 device in a chain connected to your computer.
Neither your scanner nor your computer has to be off when you connect the cable.
However, be careful not to connect or disconnect the cable when the scanner is in use.
Follow these steps to connect the
scanner:
1. Connect one end of the cable to
the IEEE 1394 port on the card.
2. Connect the other end of the
cable to the IEEE 1394 port on
your computer or on another
IEEE 1394 device.
circuit board, face down

Epson GT-30000 Specifications

Power

voltage	AC 100V-120V, 220V-240V
frequency	50-60Hz
power consumption operating without ADF	65W
power consumption operating with ADF	90W
power consumption standby without optional unit	12W

Operating Environment

temperature operating	41ºF to 95ºF (5ºC to 35ºC)
humidity operating	10% to 80% (no condensation)
humidity storage	10% to 85% (no condensation)

Scanning Specifications

optical resolution	600 x 1200 dpi with Micro Step Drive™ technology
maximum resolution	9600 x 9600 dpi with interpolation
effective pixels	7020 x 10200 pixels (600 dpi)
color depth internal	36 bits per pixel
color depth external	24 bits per pixel (selectable)
grayscale depth internal/external	12 bits per pixel
grayscale depth external	8 bits per pixel
scanning speed at 1600 dpi, draft mode, color	0.79 msec/line (approx.)
scanning speed at 1600 dpi, draft mode, grayscale	0.39 msec/line (approx.)
scanning speed at 1600 dpi, draft mode, art	0.39 msec/line (approx.)

Weight and Dimensions

maximum read area	11.7" x 17.0" (297mm x 432mm)
width	25.9" (658mm)
depth	19.2" (488mm)
height	10.0" (254mm)
weight	66 lb (37.5 kg approx.)