Epson GT-30000 - Page 34

28
Installing the Software
Testing the Scanner’s Operation (Windows Me)
Follow these steps to test scanner operation:
1. Open the Windows Control Panel and
double-click the
Scanners and
Cameras
icon to open the Scanners and
Cameras Properties window.
2. Double-click the
EPSON GT-30000
icon to display the Properties window.
3. Click the
General
tab, then click the
Test Scanner or Camera
button. If
the scanner is operating properly, a Test
Successful message displays. Click
OK
to
close the message.
Device Ready
appears next to
Status
on the Properties
window.
4. Click
OK
to close the Properties
window.