Related Information
& “Checking the Printer Status” on page 167
& “Removing Jammed Paper” on page 169
Pages are Blank or only a Small Amount of Text is Printed on the
Second Page in Received Faxes
You can print on one page by using the Delete Print Data Aer Split feature in Split Page Settings.
Select Delete Top or Delete Bottom in Delete Print Data Aer Split, and then adjust reshold. Increasing the
threshold increases the amount deleted; a higher threshold gives you a higher possibility of printing on one page.
Related Information
& “Receive Settings Menu” on page 77
Other Faxing Problems
Cannot Make Calls on the Connected Telephone
Connect the telephone to the EXT. port on the printer, and pick up the receiver. If you cannot hear a dial tone
through the receiver, connect the phone cable correctly.
Answering Machine Cannot Answer Voice Calls
On the control panel, set the printer's Rings to Answer setting to a number higher than the number of rings for
your answering machine.
Sender's Fax Number Not Displayed on Received Faxes or the
Number Is Wrong
e
sender may not have set the fax header information or may have set it incorrectly. Contact the sender.
Other Problems
Slight Electric Shock when Touching the Printer
If many peripherals are connected to the computer, you may feel a slight electric shock when touching the printer.
Install a ground wire to the computer that is connected to the printer.
User's Guide
Solving Problems
200